- What are the development status of boiling and blea
- Matters needing attention in use of scouring and bl
- How to do fabric retraction well shared by pre shri
- Introduction and process flow chart of continuous p
- Temperature is an important factor affecting the dy
- Development of energy saving and environmental prot
Yantai Hailian Printing and Dyeing Machine Co., Ltd
Address：5 Shenzhen street, Haiyang Economic Development Zone, Shandong Province
In recent years, due to the rising labor cost in China and the weakening of international demand, printing and dyeing enterprises feel chilly. At the same time, the ecological and environmental protection requirements are increasing, which also put forward higher requirements for the upstream printin...
Although the process of mercerizing yarn with scouring and bleaching machine is simple, and it is not continuous production like cotton mercerizing, due to factors such as scouring and other factors as well as manual operation, defects often occur in the dyeing process after processing due to the fac...
As we all know, clothing should shrink before processing, commonly known as "shrinkage" processing, belongs to the category of fabric finishing. Under normal circumstances, most clothing enterprises will not buy pre shrinking machine because of the requirement of "pre shrinking" in this process....
In modern fabrics, pad dyeing is an essential process. It is because of pad dyeing that we now have colorful clothes and bedding. Pad dyeing is a kind of continuous dyeing, and the tension on the dyed fabric is high. It is usually used for large-scale dyeing of woven fabrics...
There must be many reasons that affect the quality of a product, but there are also primary and secondary. The quality of dyeing equipment directly affects the appearance of the fabric, so the dyeing process should be strictly controlled. There are many factors affecting the dyeing effect, mainly dye...
2020-08-08Development of energy saving and environmental protection of printing and dyeing equipment
As we all know, in the past, the fabric dyeing was mainly based on manual rough printing and dyeing, and the aesthetic quality of the finished products was too poor. In the industrial era of the new era, there has been a considerable reform, people began to use machinery, and today, we are using inte...
2020-08-08Why do we use the pre shrinking machine?
After dyeing and finishing, the fabric will be in a potential shrinkage state. Due to the fact that the garment made of the woven fabric is easy to deform after washing, it will bring some loss to consumers. To prevent this problem, fabrics should...
Fabric pre shrinkage processing industry is a very popular industry, but also the only way for garment processing industry to turn to specialization and fine differentiation. In many coastal areas of China, there are a large number of fabric pre shrinking factories, and the fabric pre shrinking machi...
2020-08-08Attention to the weavers! The related technology of printing and dyeing equipment is suitable for fab
Due to its special use, textile products will be used in printing and dyeing equipment in production. The reason why the products can meet the requirements is mainly due to the desizing, boiling and bleaching process used by the printing and dyeing equipment. And this process effect will directly aff...
On both sides of the Changjiang River's development, the shrinking machine has been exported to the whole country, and in 2018, it introduced the concept of Internet plus, and actively promoted the production process of the rubber blanket pre shrinking machine, and further enhanced the product qualit...