The way of mercerizing machine

Mercerizing machine in the production process, its main cotton knitted fabric processing, so that it can effectively control its drying temperature in the process of use, but the equipment often overload, if serious, even cause alarm shutdown, the phenomenon is often the number displayed on the inverter will often become its flashing character.

The clothing method of mercerizing machine:

Due to the high requirements of the equipment in the process of configuration, the combination of the whole cloth feeding area includes tension adjustment, cooling drum, cloth feeding rack, etc., and the wet processing configuration will be equipped in the equipment. Although the mercerizing machine will also be effectively configured with its caustic soda cooling device, the concentration of caustic soda in the equipment can be automatically cut to accurately control the device in the equipment.

The washing box of the equipment is all used to wear cloth up and down. The whole equipment is fixed with clip. The mercerizing machine mainly uses PLC industrial programmable data for effective control, which can directly realize the inverter alarm. The torque of different DC motors is relatively small at the start-up and low-speed operation, and overload often occurs situation.

In the process of use, there will also be a crash. In this case, it is necessary to check the position of the alarm unit first, and there is no abnormality in the machinery. In the process of processing, as long as there is no obvious damage to its components, the power-off reset method is often used for effective treatment.

The mercerizing process of yarn mercerizing machine is simple, and it is not continuous production like cotton mercerizing. However, due to the manual operation of scouring and other processes, defects are often caused in the dyeing process after processing due to the non-compliance with the operation rules. Therefore, the quality of the products can be guaranteed by paying attention to the operation requirements and process parameters.