Through the intelligent equipment to our country's demographic dividend loss, and promote the production process of green environmental protection is the top priority of printing and dyeing equipment research and development. In the printing and dyeing industry, we must take the transformation and up...

The traditional control method of pre shrinking machine is to measure a certain length of fabric before wet and mark it during the start-up process. After the fabric passes through the finishing combined machine of the pre shrinking machine, the length of the fabric is measured, and then the current ...

At present, the development trend of mercerizing machine is high efficiency, energy saving and environmental protection. These three aspects complement each other and are indispensable. To develop productive forces, improving production efficiency is the most direct means. Energy saving has reached t...

The printing and dyeing equipment mainly uses its microwave equipment to heat the fiber cloth which is put into the sealed box quickly. Because the microwave heating is to use the high frequency vibration friction for heating effect, so the high temperature drying moisture of the high temperature fib...

Dyeing machine is a kind of bleaching and dyeing equipment with a wide range of applications. High temperature and high pressure dyeing machine often causes defects such as color flower, color stain, color spot, etc. due to improper process operation and poor operation, the following matters should b...

Pre shrinking machine is a kind of machine. Under certain temperature conditions, mechanical and physical methods are used to pre adjust the shrinkage rate of the ribbon and carry out ironing and setting, so as to make the density of the ribbon shrink in advance, so as to reduce or avoid the shrinkag...

Pad dyeing machine is suitable for large-scale continuous printing and dyeing process with high labor efficiency and low production cost. It is the main dyeing equipment for cotton, chemical fiber and their blended fabrics. Rolling mill is the key equipment in continuous pad dyeing machine, its perfo...

If the fixation and dyeing are not synchronous, then it will be dyed again, which will lead to uneven dyeing. If it is serious, defects may occur. Therefore, we should choose better dyes when selecting dyes, which will fundamentally lead to the above-mentioned phenomenon...

There are many factors that need to be paid attention to in the process of using the singeing machine. The requirement of fabric singeing is to remove the fuzz on the cloth surface as much as possible without causing the fabric itself to catch fire. Therefore, special attention should be paid to fire...

Singeing machine refers to the process in which the fabric passes through the flame of the singeing machine or rubs the red hot metal surface in an open width state to remove the fluff on the fabric surface and obtain a smooth surface. Its classification methods are also different. Here are several c...