Operation process of safety technology for pad dyeing machine

In the work, we need to consciously abide by various rules and regulations in the factory, and at the same time, we should obey the leadership, follow the command, and do our own work in a consistent manner, so as to ensure the basic conditions of safety.

Before starting up the pad dyeing machine, a comprehensive safety inspection should be carried out on the equipment. The pressure gauge, safety valve and various protective facilities of the pad dyeing machine should be checked to see if they are in good condition, agile and effective. In case of failure, the instruments and other devices should be replaced in time, otherwise the operation can not be carried out. Only when there is no problem can the pad dyeing machine operate normally.

Before the pad dyeing machine is started up, it is necessary to send out a signal first, and then the machine can be started after being contacted properly.

During the operation of the pad dyeing machine, it is necessary to check the oil-water separator of the air compressor pipeline connected to the equipment, and discharge water once per shift.

When the pad dyeing machine is running, it is not allowed to carry out such operations as wiping and oiling. When climbing for maintenance, refueling, etc., both the upper and lower escalators should face the escalator. At the same time, the feet should be firmly stepped on and the hands should be supported for the elderly.

When acid, alkali and other corrosive articles are used in pad dyeing machine operation, special protective equipment must be worn to avoid burns.

Editor: HX